Home > Support > What do the Whoosh, Timer, Sleep, and Clear buttons on the remote do?
What do the Whoosh, Timer, Sleep, and Clear buttons on the remote do?
Whoosh mode varies fan speed up and down to simulate natural breezes. Set the fan to your maximum desired speed, and then press the Whoosh button. To exit Whoosh mode, press the On/Off button, manually change the fan speed, or press the Whoosh button again.
Sleep, Timer, and Clear commands will vary between SenseME-enabled fans and non-SenseME fans.
I Series, Haiku L with Wi-Fi module, and other SenseME-enabled fans
Sleep: Press the Sleep button to enable your Sleep Mode settings as specified in the Haiku app. Press again to disable Sleep settings.
Timer: Press the Timer button once for every hour you want the fan to run. The fan will turn off after the selected number of hours. For example, pressing the Timer button five times will turn the fan off after five hours of run time.
Clear: Press the Clear button to disable the Timer, if it’s currently active.
Haiku L fans without Wi-Fi module
Sleep: Press the Sleep button to set an eight-hour timer. The fan will decrease in speed each hour until it reaches Speed 1. The fan will turn off automatically after eight hours.
Timer: Press the Timer button once for every hour you want the fan to run. The fan will turn off after the selected number of hours. For example, pressing the Timer button five times will turn the fan off after five hours of run time.
Sleep: Press the Sleep button when the Timer is enabled, and the fan will decrease its speed once per hour until it reaches Speed 1 or until the timer ends.
Clear: Press the Clear button to disable the Timer or Sleep Mode.
After reviewing the details you provided, we’ll assign your case to a customer support expert at our Kentucky headquarters who will contact you by phone or email to get started. During peak seasons, you may experience longer than usual response times, but we look forward to resolving your issue as quickly as possible.
Yes
No
