How do I disable my Haiku fan’s Wi-Fi signal?

Note: Disabling your Haiku products’ Wi-Fi signal will make it invisible in your mobile devices’ Wi-Fi settings and prevent connection to the Haiku app. 

1. Make sure your fan has firmware version 2.3.2 (or later). To see which firmware version your fan has, open the Haiku Home App, tap  , then tap Update Firmware to see the firmware version of each connected Haiku product. If required, you can update your fan’s firmware from this screen.
2. Restore your fan to its factory settings.
3. While pointing the remote at the fan, press and hold the fan ON/OFF button until the LED indicators blink.
4. Within 30 seconds, press the “plus” button five times.
5. The LED indicators will turn on briefly and then stop blinking. The fan’s Wi-Fi signal is now disabled.

Note: To re-enable the products’ Wi-Fi signal, complete a network reset using the remote control.

Was This Helpful?

Yes

No