Follow the instructions below to view and adjust your Haiku products’ configurations.
Note for Android users: Some of the configuration details below may be found in the Rooms section of the Settings menu.
, and then tap Rooms & Devices.
, then tap Settings, and select Devices.Name
Change the name of the fan.
Fan Height
Specify the fan height. This is the approximate distance between the floor and the fan’s airfoils.
Network Configuration (Wi-Fi Settings on Android)
View and control network information, including the fan’s IP address and Wi-Fi network. Create and set up an access point.
Reverse Fan
Toggle to reverse the direction of fan rotation. The fan must be stopped before reversing.
LED Indicators
Toggle to disable/enable the LED indicators located on the bottom of the fan
Fan Beep
Toggle to disable/enable the fan beeps, which sound when fan speed or an app setting is changed
Firmware Version
The fan’s firmware version
Device Type
The Haiku product type
MAC ID
The MAC address is the unique network identifier for the fan.
Local Time (Date & Time on Android)
The device’s date & time settings are used for scheduling. These are set automatically, when your device is first connected to a Wi-Fi network.
Name
Change the name of the light.
Firmware Version
The light’s firmware version
Device Type
The Haiku product type
Network Configuration (Wi-Fi Settings on Android)
View and control network information, including the light’s IP address and Wi-Fi network. Create and set up an access point.
MAC ID
The MAC address is the unique network identifier for the light.
Local Time (Date & Time on Android)
The device’s date & time settings are used for scheduling. These are set automatically, when your device is first connected to a Wi-Fi network.
Yes
No
