How do I operate the AirGo Misting System?


Water supply requirements: 15–60 PSI, 140°F (60°C) max

Do not operate the misting pump without the filter.
Do not plug the fan into an outlet on the misting pump.

To operate the AirGo Misting System:

  1. Turn off the fan.
  2. Plug in the misting pump (20 A circuit).
  3. Turn on the water source.
  4. Press the red button on the pump filter to purge air.
  5. Flip the pump Power switch to ON.
  6. Press the pump Start switch.
  7. Turn on the fan.

To stop misting, flip the Power switch to OFF and turn off the water source.

This applies to these products: AirGo

Was This Helpful?


Still need help?

Call Email