How do I adjust my fan’s occupancy sensor settings using the standard controller?

1. Press and hold the standard controller – and + buttons until the Menu screen appears.
2. Press + until you reach the Motion Sense screen, and then press the power button to enable the occupancy sensor.
3. Press + to navigate to the Motion Timeout screen. Motion timeout specifies how much time should pass after no motion is detected before the occupancy sensor turns the fan off.
4. Press the power button to adjust the motion timeout: 30 minutes (default), 1 hour, 2 hours, 4 hours, or 8 hours.
5. Press – to exit the settings menu.

Was This Helpful?

Yes

No